This mold produces a very realistic, full-size wagon wheel.  For ornamental use, concrete is far better than wood because it cannot rot.  Mold makes the wheel with a flat back (excellent for mounting against a wall or fence).  The uses are almost unlimted.  They've even been used on plaster ceilings for escutcheons with lights hanging from the hub and rim.  Join to of them back-to-back to make a complete, three-dimensional product as illustrated in the side-view photo.

Each wheel requires reinforcement with 1/4" or 3/8" diameter rod.  Standard procedure is to make a loop around the entire rim and place a rod in each spoke.  This requires approximately 34 feet of rod per item.

• Diameter: 43"
• Thickness at rim: 1-4/4"
• Thickness at hub: 3-3/4"
• One-piece mold with steel hole former
  
• Weight: 60 lbs.