This Cart is often used as a planter.
The Cart mold has four "T" shaped metal rods that are to be oiled and left in place while the mold is poured. They are removed before taking off the mold and the result will be four holes that will be used to bolt on the shafts for the wheels. Two No. 711-TS threaded fasteners are used so that you can attach the wheels to the cart by using standard 3/8" x 3" bolts.
Please note that a pair of shafts are supplied with the cart mold. It will be advisable to use them as paterns for making additional safts. The procedure is relatively simple and requires only one bend, but it must be in the right place. Regular 1/2" stove bolts can be used to attach the shafts to the cart. We recommend you secure the safts to the donkey with nylon webbing or electrician's tape.
- Base: 7-1/2" x 14-1/2"
- Top: 11-1/2" x 20"
- Height: 10"
- Five-piece mold one pair of steel shafts and two threaded sockets.
- Weight: 39 lbs.
Note: Wheels shown in image are produced from a separate mold which must be purchased.