Elevating Base & Pump Housing for Sea Shell Bowl No. 120

Features attractive nautical twirl on each end.  Mold forms slot at upper back for power cord from pump and a 1/4" thick shell over a 2" diameter hole at center of top.  You can leave the top plain or punch out the hole to connect a statue to a pump.  Water enters the pump area through grooves on the bowl. 

• Average Thickness:  1-1/4"
• Concrete Housintg Weighs about 30 lbs.
• Height: 7-5/8"
• Top Diameter: 9-3/4"
• Width: 19" front to back
• Two-piece mold
• Weight: 35 lbs.